Samsung SmartThings Water Leak Sensor review: A cheap detector that leans on its ecosystem

Samsung SmartThings Water Leak Sensor review: A cheap detector that leans on its ecosystem

When shopping for a smart water leak sensor, you can either pay more for lots of extra features, or opt for a basic device that simply sends alerts to your phone.

Samsung’s SmartThings Water Leak sensor falls into the latter camp. At $40 per sensor, it’s on the inexpensive side for flood detection. But on its own, it’s also limited in its ability to detect and alert you to hazardous conditions.

Setting up the sensor

The SmartThings Water Leak sensor requires a $100 SmartThings hub, but once you’ve set that up, pairing the sensor is dead-simple. Pop off the rear cover and remove the plastic tab from the battery, and the sensor enters pairing mode. You then instruct the SmartThings app to find new devices, and the rest happens automatically. By default, SmartThings will send push notifications when the sensor detects water, but you can also plug in a phone number for SMS alerts.

SmartThings’ sensor is among the smallest we’ve tested, at 2.3 inches long by 1.5 inches wide by 0.9 inches thick, but it doesn’t include any extension cables to detect water in tight spaces. You’ll just have to plunk the water sensor down as close to the source as you can.

How it works

Unlike most smart flood detectors, the SmartThings sensor doesn’t have its own alarm, and the hub doesn’t have one either. That means you’re entirely dependent on alerts from your phone, and you won’t get those if the power goes out.

The SmartThings sensor also lacks some frills found on other sensors, such as temperature readings and support for external power supplies. (The included CR2 battery should last between two and three years on a charge, which is typical among smart sensors.)

At least the SmartThings platform helps compensate for some of these shortcomings. Through the SmartThings app, you can have the sensor sound an alarm on connected speakers, flash a warning on connected light bulbs, or trigger a water shutoff valve. And in case the SmartThings ecosystem isn’t enough, the platform also integrates with IFTTT. This allows you to set up phone or email alerts, and integrate with other smart home products that SmartThings doesn’t support natively.

smartthingsapp

Samsung’s integrations help make up for a shortage of built-in alert mechanisms.

At $100 for a hub and $40 per sensor, the SmartThings Water Sensor isn’t the cheapest solution around. Insteon’s hub costs $80, and sensors usually sell for around $20, while Lowe’s Iris costs $60 for the hub, plus $30 for sensors from Utilitech.

Still, if you’re looking for a setup that plays nicely with lots of other connected devices and services, or are attracted to the SmartThings platform in general, Samsung’s name-brand sensor might just be good enough.

IDG Insider

PREVIOUS ARTICLE

«Expect a new Swift upgrade this spring

NEXT ARTICLE

LeakSmart Sensor review: Emergency shutoff makes it worth a look»
author_image
IDG Connect

IDG Connect tackles the tech stories that matter to you

Add Your Comment

Most Recent Comments

Our Case Studies

IDG Connect delivers full creative solutions to meet all your demand generatlon needs. These cover the full scope of options, from customized content and lead delivery through to fully integrated campaigns.

images

Our Marketing Research

Our in-house analyst and editorial team create a range of insights for the global marketing community. These look at IT buying preferences, the latest soclal media trends and other zeitgeist topics.

images

Poll

Should companies have Bitcoins on hand in preparation for a Ransomware attack?